This driver is intended to provide support for all Meade telescopes. Currently it implements basic commands defined in the LX200 interface document. As such, it will work in basic form for any telescope that implements the basic Meade command set.
I intend to add more capabilities to the driver as I get to them and as they are requested.
|
01/31/2022 |
1.2.5 |
This change adds MoveAxis commands for Autostar II capable telescopes. This works for RA as Primary and Dec as Secondary axes |
|
|
05/04/2021 |
1.2.4 |
This change allows the user to select an interface baud rate of 19200 |
|
|
04/13/2021 |
1.2.3 |
This change allows the user to select an interface baud rate of 57600 |
|
|
09/21/2020 |
1.2.2 |
This change defaults to no log file and also allows the user to select the interface baud rate (such as might be required for Magellan system) |
|
|
03/15/2020 |
1.2.1 |
Updated version with some park telescope improvements and ability to bias the RA readout |
|
|
09/12/2018 |
1.2.0 |
Alpha version of driver for testing only |
|
|
06/29/14 |
1.0.21 |
Corrected an initialization error in the original version, renamed the dll, changed the breakpoint time for changing from pulse guide to slew to 60 seconds. |